Search Results for ‘ddt4all’

Hi I just swapped to winter tires and have to code the tpms valve to the car. Is there any specific order they have to be in ddt4all? I can’t see on the screen what tire is what value. mother tpms systems are front left, front right, rear right, rear left (in that order) is that the same on...

Look what I found on DDT4ALL today (well I think I may have found it before but I have just found it again) in the EVC section of the ECU's Requested speed Setpoint for FSL function - (I am presuming the SL stands for 'Speed Limiter' ) So, got me wondering . Its set to 200km/h - so is that...

Hello all - just letting you know i have just finished writing an exhaustive blog today about all the different settings inside the MMI settings on the Zoe ZE50 Ph2 (yes it took me nearly all day!) and it is very long sorry, you might want to sit down with a cup of tea and a digestive , but if...

went into EVC settings today for my Zoe EV. I noticed that the cooling fluid was set for R134a refrigerent, and it was filled last July so I changed that to 1234YF - i dont know what bearing that has but i thought I would set it to that anyway because that's the refrigerant they use these days...

Have changed a couple of settings in EV common configuration settings and never wrote the parameters down or saved them - nothing actually wrong, car is remote pre-con and battery sowing up in app but I just want to double check the figures what they are supposed to be. The parameters I have...

Hello all, a couple of months ago I reset my rlink radio in my Zoe. I put a load of settings in manually and got the rlink working again fine on most things - but I am missing the settings for the communication parameters and have to fill them out again. in the APN box I have...

I am itching to see what changing to 'old mmi configuration' does in the BCB settings but i dont want to bugger me car up - anyone else tried changing it? MMI I am presuming is multimedia interface (ie the r-link radio screen) BCB - battery control box Q10 22kw 2013 Zoe.

Hello all , looking for a wee favour please. especially for those who have been into the MFD settings of the rlink radio to enable Android Auto with DDT4ALL , you will know which area I am talking about. There is a section in the EV features which says: 'Vehicle Charging Receptible type'...

peculiar thing in my 2013 Zoe 22kw - I would expect TCU Gen1 , instead when I search for TCU ECU in PyREN it finds TCU_GEN2_V3.2 and 2015 ... which leads me to think that TCU module must have been updated at some stage with previous owner . however when I put GEN2 into my MFD settings and...

Hello all , in the normal check of things today all things DDT4ALL I found that the refrigeration/cooling parameter on my 2013 q210 22kw Zoe is set to R134a refrigeration. last year my car was in the garage/ Renault main dealer it had leaking seals around the traction battery cooling area and...

Today I turned off PTC cabin heating on my Zoe (ZE20) - I can easily enable it again. I see it was drawing 1800w (1.8kw) electrical power when it calls for it through the HVA settings and to be honest I would rather have the range in the winter. has anyone else done this? - I wonder what...

Here are some things I have enabled/disabled on my Renault Zoe ZE20 2013 Q210 model using DDT4ALL software since I have owned it: Some things i have left after changing parameters , and some I have put back to how they were. I got my car second-hand in July 2020 and its a 2013 Renault Zoe...

I have a Renault ZOE 22kw 2013 EV and I have always thought that when the interior heater climate control is set to deflect to footwell that its very poor. The heater is good out of every other vent like when deflected to windscreen or face vents on the dash but footwell very poor and my feet...