Speak EV - Electric Car Forums banner
1 - 1 of 1 Posts

·
Premium Member
ID.4 GTX & M3 LR
Joined
·
11,304 Posts
You’d need to find a suitable earth point and then tap into a lighting wire, there’s an illuminated switch in the centre console on the e-Golf if I remember correctly, the auto hold switch?

I presume the box is a small transformer/driver for the LEDs? I don’t know how many amps that will draw, but you need to be aware of that before splicing with the switch wiring. I’d be inclined to add a fuse as well to isolate the car as much as possible from a fault condition in that LED set.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top