Speak EV - Electric Car Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
637 Posts
Discussion Starter #1
Following on from a thread where a member melted their cable due to contact resistance heating. I decided to clean both cable and charge port.
I used contact cleaner with a spray tube to get into the small contacts and some small swabs to clean the charge port pins.
I got a fair bit of gunge off the charge port pins so happy with that.
 

·
Registered
Joined
·
370 Posts
"Cleanliness is next to Godliness" - this was the motto of my engine building guru back in the 1970s!
 
1 - 2 of 2 Posts
Top