[grovep]

I recently have been having problems with charging my car - I have a Rolec type 2 unit with tethered cable and ECCV3221-17U plug.
I plug the charger in and sometimes it starts to charge and all is good and other times it cycles several times then starts charging and other time the charging indicator on the car goes red for error. I guess its a poor connection between plug and car and normally after moving the plug around and several attempts it works ok. The unit is just out of warranty I guess its one or more of the female contacts in the plug. It works ok when I plug in elsewhere hence why I think its the plug rather than the car. Any suggestions how I can test further or otherwise?

Thanks

 

[grovep]

If it’s connected to WiFi put it on charge and call Rolecs helpline, they should be able to see the fault.

Sorry its not connected to WiFi

 

[grovep]

Thanks I'll try the contact cleaner but it all looks clean - dirt & corrosion free.