Speak EV - Electric Car Forums banner

Fluence Flixed!

4689 Views 23 Replies 6 Participants Last post by  Toomba
Oh, what a day!

This afternoon I took my Fluence for an MOT. I was surprised to hear that it failed due to rear fog lights. I never use the damn things. However, indeed, they don't seem to work. There is a 2nd control on the indicator stalk which you flick one way for front fogs, (they work) and the other way for rear fogs.

I thought it must be a fuse, so consulted the manual. They do not mention one for fog lights, but the fuse box contains many more fuses than are shown in the book. Therefore I started pulling them out one by one to try to find a duff one.

They all seem okay. However, my car now has loads of error messages and won't move. What have I done?

I have the 12v battery off overnight, and hope it may forget this by tomorrow. Failing that will try the scan tool.

Any thoughts?
21 - 24 of 24 Posts
For anyone wanting CHAdeMO on their Fluence or Kangoo ZE let me know.

Sent from my SM-A405FN using Tapatalk
Why did you choose CHAdeMO rather than CCS?
CCS is bloody expensive :)

Sent from my SM-A405FN using Tapatalk
Ah, must be the de-facto new standard then. :devilish:

Very impressive work though.
Where are you located Toomba? How much for each option?
The job can be done at my friend's garage in MK, at my home in St Albans or I can drive to your place.

700 for the diy and 1050 for the full install.

Sent from my SM-A405FN using Tapatalk
21 - 24 of 24 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top