[stageshoot]

Battery Voltage

Can someone with a 2018/19 car who uses EVnotify or TorquePro. Tell me what voltage the battery is reporting at 100% full

I am sure it was 405v on the 2018/19 but can't find a screenshot to confirm it..

It's just the voltage on the 2020 seems a bit higher when fully charged.

 

[KiwiME]

407.7 to 408.7 V has been reported from owners this July in summer temps.

 

[stageshoot]

407.7 to 408.7 V has been reported from owners this July in summer temps.

Cheers was just wondering as mine was charged to 100% for the first time since I got it today, and it topped out at 410.1v at 100%. 23c Ambient from 50% to 100% on a 7kw public charger

100% State Of Charge
95.5% BMS State of Charge
410.1v at full

 

[KiwiME]

4.185 V per cell is getting up there, 410.1/98. The per-cell readouts BTW only have a resolution of 0.02.

 

[rompik]

 

[stageshoot]

4.185 V per cell is getting up there, 410.1/98. The per-cell readouts BTW only have a resolution of 0.02.

is it /98 I thought there were 96 cells (There are only 96 cell readouts in TorquePro)

 

[davesul]

is it /98 I thought there were 96 cells

The github PIDS were amended some time ago to have 98 cells for Kona and Niro

 

[stageshoot]

The github PIDS were amended some time ago to have 98 cells for Kona and Niro

Cheers, Shows how out of date I am ;-)

 

[davesul]

Cheers, Shows how out of date I am ;-)

Actually Richard, I think you are in the forefront of most of us, on just about every aspect of EVs.
Certainly for the Kona...

 

[stageshoot]

Actually Richard, I think you are in the forefront of most of us, on just about every aspect of EVs.
Certainly for the Kona...

I pity you all then as its real case of the blind leading the blind then ;-). But on the good side at least you can hear the scream and stop when I go over the cliff edge..