Speak EV - Electric Car Forums banner
1 - 2 of 2 Posts

· Registered
46 Posts
Discussion Starter · #1 ·
Hi, been a while since I have been here and asking for help!

I am currently making a buggy from a DC G wiz, with 12kwh of lithium cells! I am videoing it too so could be a different watch..

But am coming stuck on the controller.

I have the contactor circuit issues - getting error 2.1 or 2.4. I have sent the controller for repair but that didn't prove successful! Its the 1274 Curtis. The controller checks out at 320ohm (about 7w) and works fine when independently powered.

Has anyone got experience with this? or a dusty controller they no longer need?
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.