Speak EV - Electric Car Forums banner

Peugeot iOn - Granny cable works but not Wall Box

1030 Views 7 Replies 6 Participants Last post by  richi
Just posted this in another part of the forum, but then realized here is more suitable.

I just got a Peugeot iOn and I can't get the charging to work from the 7 kW wall box, but it does charge with the granny charger. I had a Renault Zoe a year ago which charged from the box with no issues, and there are no signs of damage (the app says everything is fine and can detect the car, but the car doesn't seem to allow charging to happen).

I believe the iOn is limited to 16 A, but my charger can modulate so I don't think this would be an issue. In the manual, it only mentions the granny charger and there is no mention of mode 3 charging, but surely this is possible? When I stick the cable in, the red charger light on the dash flashes 2 or 3 times so it does detect it, but for some reason it doesn't allow charging to happen.

Any ideas?
1 - 3 of 8 Posts
And are you sure the cable's good? Can you try another one? Can you try your cable on a public AC charge unit?
  • Like
Reactions: 1
What year is the car? I believe someone else found a similar problem last year with a 2010 car.
I think you're thinking of those very early i-MiEVs that didn't have a granny, because they didn't speak J1772 protocol.
  • Like
Reactions: 1
On the face of it, this doesn't sound like the usual problem with the early i-MiEVs, because OP said "Peugeot iOn" and "granny."
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top