Speak EV - Electric Car Forums banner

PME Supplies & Electric Vehicle Charge Point

724 views 2 replies 3 participants last post by  Ecoharmony Ltd 
#1 ·
Am I correct in thinking PME supplies to EVCP's are fine as long as Type B RCD Device within the installation & Open PEN protection Devices are used. Is it ok for these Open PEN protection devices to be installed within the ECVP's or do they have to away from the charge point?

Thanks in advance.
 
#3 ·
You might also want to include surge protection.

We have a product that is surge protection + RCBO in a consumer unit if that's of interest


Cheers
David
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top