Speak EV - Electric Car Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
206 Posts
Discussion Starter · #1 ·
hi all we have the first edition id 3 black/grey but omg it shows every little scratches especially on the boot,Hubby has tried t cut on it but makes it dull colour any recommends from anyone
 

·
Registered
Joined
·
196 Posts
Hubby has tried t cut on it but makes it dull colour any recommends from anyone
Not sure whether this shade has a clear lacquer applied over colour coat but "T-cut" much too harsh and designed to remove "oxidised paint" and will damage surface. Whilst of no help to you it may encourage other owners perhaps to have "ceramic coating" applied to paintwork from new to obviate this.
 

·
Registered
ID.3 Tour
Joined
·
612 Posts
A true ceramic coating (not a DIY applied ‘ceramic’) will help.
T cut is far too abrasive, you need the shiny black (plastic) bits machine polished and either wrapped in PPF or ceramic coated.
it’s a crap design IMO and the sooner they stop using ‘piano black’ plastic bits the better.
 
1 - 3 of 3 Posts
Top