Speak EV - Electric Car Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
Hi

Can anyone one tell me where the setting for 'avoid drain' is on the Zappi v1 please. I've gone over the manual and the unit which is up to date but can't find it.

I've got a Powerwall 2 so will come in very handy.

Thanks in advance.

Luke
 

·
Registered
Joined
·
2,134 Posts
At the risk of stating the obvious, you also need to give it a sensor (CT clamp) feed from the battery.
 
  • Like
Reactions: burnt_crisps2

·
Registered
Joined
·
49 Posts
Discussion Starter #4
At the risk of stating the obvious, you also need to give it a sensor (CT clamp) feed from the battery.
You can never be too obvious with these kind of talks.
I've checked my harvi and I have a CT clamp going to the live and the second looks like it goes to my powerwall. I can't see the clamp, just the wire into the trip box. I'm wondering if the clamp is on the wrong way round?
 

·
Registered
Joined
·
2,134 Posts
I can't see the clamp, just the wire into the trip box. I'm wondering if the clamp is on the wrong way round?
What behaviour are you seeing that makes you think it's the wrong way round? If it is, you could swap the wires inside the Zappi if you didn't want to fiddle with the Powerwall.
 
1 - 5 of 5 Posts
Top