Speak EV - Electric Car Forums banner

Leaf Rear Demister

5.5K views 22 replies 13 participants last post by  pee-wee  
#1 ·
Before i go back to the dealer can anyone tell me if clearing the rear window of mist on these cold miserable mornings should be harder than simply pressing the rear demist button?.Am i missing something?.Or do i just have a fault?.When i press the button it lights up but nothing happens and the rear window just doesn't clear.Full half hour commute and cant see anything out of rear window.Only had car eight weeks and not needed to use it before.
 
#3 ·
Mine is a bit weedy - but if you don't see some lines beginning to clear pretty quickly then I think there's something wrong with it.

In theory the pre-heating should sort the demisting out before you get in the car, but to be honest because it blows warm air in the front of the car all the moist air tends to get pushed to the back. I have no solution for this!
 
#4 ·
I wondered about my rear demister too. Mine doesnt *seem* to do anything.
Havent had chance to properly test it / report it to Nissan.

I will test & let you know.

- 2014 Acenta
 
#14 ·
Mine is rubbish, had it checked at the first service and was told it was fine but some are just weak. I don't even bother with it any more.
Maybe some anti-fog coating would do the job.
 
#16 ·
I try and keep my leaf as moisture free as possible, I open the windows a bit on the start and end of journeys and also every time I'm driving slowly. That along with a small silica dehumidifier really helps, my demister tends to work under these conditions. Preheating the car helps to vent the moisture in the mornings.
 
This post has been deleted
#22 ·
…clearing the rear window of mist on these cold miserable mornings should be harder than simply pressing the rear demist button?
Are you driving with the Eco button on? I know that limits power to heat and air con. Perhaps it reduces the power to the rear window demister as well.
On someone's advice on this forum, I bought this. Not sure how much difference it makes but, until I can get carwings working and use the preheat function, I'll take anything I can get!