I think it does. A taxi driver with an e-nv200 told me he checks SoH with OBD (probably Leaf Spy).

Enviat des del meu SM-G930F usant Tapatalk

 

I had bought an OBD2 device on Amazon that supposedly worked ok on a Leaf, but all it did was send my eNV200 into an electronic hissing fit, setting off bleeping and all the dashboard symbols flashing away, eventually leaving a warning symbol in place. Fortunately that went away after switching off and on again 3 times. So I haven't dared get a replacement!

 

ive got an env200 and i use leafspy regularly with no issues. I think is all to do with the type of dongle your using. The cheap ones off ebay arent very good at all. i use a kenweii type, it does work well for me, although there was a batch of these with incorrect resistors on the pcb, you`ll need to check if you buy one of this type that its ok and built to spec. Plenty of info about this and how to do it on the web

 

my dongle also works on my brothers 2015 leaf tekna too.

 

Is anybody else successfully using leaf spy on their env and could recommend a dongle to buy? I really don't want to experience what Flying Dodo did by getting the wrong dongle.

 

I am successfully using leafspy with a konweii dongle. I will say tho for some reason on the e-nv200 the mileage is always wrong. Everything else is good like charges, ah, charge rate, gid`s, etc,,,, all good except the mileage covered, mine reads very low, last time i read it actual mileage on odo was about 40k but in leafsy it read around 12k.
It reads correctly mileage on my brothers leaf tho.

 

Just received a konnwei kw902. Plugged in and paired using bluetooth. Didn't realise there was a power button to turn the thing on. All seems good